Back to Blog
How-to Guides 2026-11-20 AllPetSolutions 0 views

How to Set Up AllPondSolutions 2000EF+ Aquarium Filter

How to Set Up AllPondSolutions 2000EF+ Aquarium Filter

Learn how to set up the AllPondSolutions 2000EF+ external aquarium filter, including placement, media loading, UV operation, and priming steps.

What the 2000EF+ Brings to Your Tank

The AllPondSolutions 2000EF+ is an external canister filter rated for tanks up to 1000 litres. It moves water at 2000 L/H through four separate media baskets, each dedicated to a different filtration stage. A built-in 9W UV steriliser adds micro-organism control. Because the unit sits outside the display, it frees up tank space and holds far more media than an internal filter can.

Setting it up correctly means understanding how the baskets layer, how the self-priming system works, and how to manage the UV independently. This guide walks through those steps using the supplied evidence.

Step-by-Step Setup

  1. Position the filter outside the tank: Place the 2000EF+ below the water level of the aquarium. The inlet and outlet tubes run from the tank to the filter unit. The drip-free shut-off tap lets you disconnect the filter for cleaning without spilling.
  2. Assemble the media baskets: The filter comes with four baskets. Fill each with the supplied media: bio balls, ceramic rings, coarse foam, and fine filter floss foam. The layered system keeps biological, mechanical, and chemical filtration separate. You can customise the media later for your specific livestock needs.
  3. Connect the pipework and spray bar: Attach the inlet tube to draw water from the tank, and the outlet tube fitted with the spray bar. The spray bar increases aeration as water returns. Note that the pipework in the packaging may differ from what is provided with the filter.
  4. Prime the filter: The 2000EF+ is a self-priming unit. After a simple initial setup, the filter fills itself with water and starts circulating. Follow the manufacturer's priming instructions that come with the unit.
  5. Set the UV steriliser: The 9W UV bulb is built in. Use the UV on/off switch to control it independently from the filter pump. Turn it on when you want to reduce free-floating algae or pathogens. The UV light is sealed inside a quartz glass sleeve to maximise exposure.
  6. Check for leaks and adjust flow: Once running, inspect all connections. The drip-free tap should be closed when moving the filter. Adjust the spray bar direction to suit your tank's circulation needs.

Key Specifications at a Glance

Maintenance and Customisation Tips

The drip-free tap makes it easy to move the filter to a sink for cleaning. Each media basket lifts out individually, so you can rinse or replace media without disturbing the others. The UV bulb can be switched off during routine maintenance to avoid unnecessary exposure.

Because the baskets are separate, you can adjust the media mix over time—for example, adding more ceramic rings for biological filtration if your bioload increases, or swapping fine floss for a denser mechanical pad. The supplied evidence confirms that the layered system is simple to customise for your aquarium's needs.

Related Articles

Customer Service
Home
Products
Cart
Profile