Why Fresh Foams Restore Filtration
Worn or blocked foam is one of the most common reasons a pond filter quietly stops performing. When the foam is clogged, water takes the path of least resistance and much of it bypasses the media altogether. A fresh set restores both flow and filtration, keeping your pond water clear and healthy.
The key is knowing when to replace them and how to do it without crashing your biological filter.
Signs Your 25x18 Foams Need Replacing
- Reduced water flow from the filter outlet: If the flow has noticeably dropped even after cleaning, the foam may be too compacted to allow proper water passage.
- Foam feels stiff or compressed: Over time, foam loses its open-cell structure. If it no longer springs back after squeezing, it's time for a replacement.
- Water bypasses the media: You might notice water finding a path around the foam rather than through it. This is a classic sign of blockage or worn-out media.
- Cleaning no longer restores performance: If rinsing the foam doesn't bring back flow and the water still looks dirty, the foam has reached the end of its useful life.
Choosing the Right Replacement: 25x18 Foams
The AllPetSolutions 25" x 18" Garden Fish Pond Replacement Filter Foams set includes three profiled three-layer foams: one coarse (black), one medium (blue), and one fine (green). These are intended for gravity-fed flow-through filters. If the fit isn't exact, each foam can be cut down to size and shaped around pipework, so they work with a wide range of filter models.
Product Specifications at a Glance
- 25" x 18 Garden Fish Pond Replacement Filter Foams x 3: Set of three 25" x 18" / 64cm x 46cm three-layer foams: 1x coarse (black), 1x medium (blue), 1x fine (green). The three different grades allow you to maintain a graduated filtration, trapping debris from large to small particles.

25" x 18 Garden Fish Pond Replacement Filter Foams x 3 - 25" x 18 Garden Fish Pond Replacement Filter Foams x 3: Each foam can be cut down to size and shaped around pipework where the fit is not exact. This flexibility means the set can be used in many gravity-fed filters, not just those with a perfect 25x18 chamber.
How to Replace 25x18 Filter Foams Step by Step
- Turn off the pump and isolate the filter: This prevents water from flowing through while you're working and avoids running the pump dry.
- Remove the old foams and note their order: Pay attention to which layer was coarse, medium, and fine. You'll want to replicate the same order for proper filtration.
- Trim the new foams if needed: If the new foams are slightly too large, use sharp scissors to cut them down to size. Shape around pipework as required.
- Stagger the replacement to protect bacteria: Replace only one or two foams at a time, not all three at once. This allows the beneficial bacteria on the remaining foams to recolonize the new media, maintaining biological filtration.
- Reassemble the filter and restart the pump: Make sure all foams are seated properly and the lid is secure before turning the pump back on.
Maintaining Biological Balance
Our advice is to check the foams routinely and stagger the replacements rather than swapping them all at the same time. This way, healthy bacteria levels are maintained, and your pond's ecosystem stays stable. If you replace all three at once, you may see a temporary spike in ammonia or nitrite as the bacteria colony re-establishes.


