Why Your Aquarium Filter Foams Need Replacing

Quick answer

Replace your aquarium filter foams when they lose shape, tear, or no longer clean up well after rinsing—typically every 6 to 12 months depending on load and maintenance.

Diagnose and fix your filter foam

• Symptom: Reduced water flow from the filter outlet, or water bypassing the foam and flowing around it.
• Likely cause: Clogged or deteriorated foam that no longer allows water to pass through effectively.
• Corrective action: First, rinse the foam in tank water (not tap water) to remove debris. If flow doesn't improve, or the foam is torn or misshapen, replace it with a new one. Keep a spare set of foams on hand so you can swap them during routine maintenance.
• When to stop or choose another option: If the foam is less than six months old and rinsing restores flow, you can continue using it. But if the foam is damaged or you've rinsed it many times, replacement is the safer choice for your aquarium's health.

Products that help

• AllPondSolutions 500L/H Aquarium Internal Filter INFIL-700: The AllPondSolutions 500L/H Aquarium Internal Filter INFIL-700 has a tall body with two replaceable sponges, giving extra media volume for a heavier bacterial population and more debris capacity. More foam means longer intervals between replacements, but you still need to monitor the condition of each sponge and swap them when they wear out.

  

• Spare Replacement Foams for 700IF+ Internal FIlter: This set of 3 official replacement foams is cut for the AllPondSolutions 700IF+ and measures approximately 70mm in diameter by 100mm in length. Using the correct size ensures a proper fit inside the filter, so water flows through the foam rather than around it, keeping filtration effective.