AllPondSolutions Pressurised Pond Filter PFC-8000/ ECO 6000 Pump Complete Kit

Hiding the hardware is half of pond design. Because a pressurised filter can push its outlet higher than its own body, this PFC-8000 kit lets you tuck the filter away behind planting and still run the return into a waterfall. The supplied pond pump keeps the unit continuously pressurised, maintaining excellent water quality for healthy fishkeeping.

Water is fed directly from your pond pump through to the filter container and subsequently the outlet, continuously under pressure. Because the outlet can sit higher than the filter body itself, the unit is far easier to disguise around the pond – particularly useful if a waterfall is part of the plan.

Routine cleaning is handled by the rotating handle on the head. Turn it and the interior sponge is rinsed in place; open the separate outlet afterwards and dirty water is discharged until it runs clean. A small float pops out of the head when a detailed clean is genuinely needed, so you are not guessing.

Each unit is supplied with a built-in UV Light, which effectively prevents growth of algae and eliminates harmful micro-organisms and parasites which may cause fish diseases.

Filtration

Water passes through the PFC-8000 in the following order

1. Pond water flows into the PFC-8000 via your pond pump
2. Initial filtration begins by removing large particles through a mixture of coarse and fine filter foams (mechanical filtration)
3. Then the water passes across bio balls that harbour good bacteria across large surface area (biological filtration)
4. Lastly the exiting water is exposed to a 11w UV steriliser capable of reducing harmful bacteria and algae
5. Clean, clear and healthy water exits your PFC-8000 and returns to your pond.

_{Please note: The diagram above is only an example of the water route through the system and does not exactly match this filters features.}

PFC Pressurised Pond Filter Features

• Unit is supplied with 4 filter foams
• 2x fine yellow foams
• 2x coarse blue foams
• Bio balls included (loose; no cage)
• Pressurised Filter allows exiting water to run up-hill
• Biological and Mechanical Filter chambers for more efficient removal of dissolved and solid waste
• Simple Quick Handle Cleaning System for Easy Maintenance (no need to open and clean foams all the time)
• Enables Rapid Growth of Aerobic Bacteria resulting in removal of Lethal Ammonia and Nitrite
• Able to Cope with Higher Water Flows compared to Traditional Gravity Filters
• Complete with Inlet and Outlet Hose Adapters

Complete System Items

These systems can be purchased either on their own or as a full complete kit with pump, hose and hose clips. Included as part of these kits are our low wattage, highly economical AquaECO pumps, guaranteed to bring you savings on your energy bill whilst still delivering the right water flow your pond requires.

AllPondSolutions AquaECO Pond Pump

The AquaECO series brings new electronics to pond pumps, and with them large energy savings, low noise and long durability alongside high performance. Wattage use across the AquaECO range is extremely economical compared with other pond pump brands, saving you money in the long run. The pump is designed to circulate water to a pond filter or waterfall, and its cage is shaped to prevent clogging by providing the maximum surface area for drawing water in through the guard to the pump. An additional inlet is included, letting you attach hose to the pump inlet and feed it directly from a source such as a pond skimmer.