AllPondSolutions 800L/H Aquarium Internal Filter 800IF

Turnover matters as stocking levels climb, and at 800L/h this internal filter moves enough water for fresh or salt water aquarium tanks holding up to 150 Litres. It runs entirely submerged and, in principle, does away with the need for a separate air pump.

Two return fittings are supplied, used one at a time rather than together. The adjustable spray bar comes in two 16cm tubes making 33cm in total, spreading the return across the surface to raise oxygen levels. Alternatively, the venturi aeration nozzle speeds the returning water and pulls a stream of air down from above the surface, producing a steady curtain of bubbles.

A replaceable filter sponge is fitted inside the unit from new, and suction caps are supplied so the body can be fixed to the side of the tank.

Features & Specification

• Designed for submersible use only with adjustable spray bar to increase oxygen levels.
• Venturi aeration nozzle supplied to create bubbles, increase oxygen level of returning water. No air pump needed in principle.
• Venturi effect: As water is pumped back into the tank, it can also be aerated by a venturi pipe. This accelerates the water flow and draws in a stream of air from above the surface.
• You can only either use the spray bar or Venturi aeration nozzle not both together.
• Replaceable filter sponge included inside the unit and also complete with suctions caps for attaching to the side of your tank.
• Power consumption: 16w
• Max Output: 800L/h
• Height Max: 1.4m
• Spray Bar Length: 33cm (supplied in 2x 16cm tubes)
• Dimensions: 95 x 62 x 287 mm
• Power Cable Length: 1.4m
• Voltage: 220-240v
• 12 Months warranty