AllPondSolutions 300L/H Aquarium Internal Filter 300IF

A tank of up to 70 Litres needs turnover without a current strong enough to blow the substrate around. This 300L/H Internal Aquarium filter is matched to that range, suits fresh or salt water, and draws only 2w doing it.

It is built for submersible use only. An adjustable spray bar is supplied for raising oxygen levels, and a venturi aeration nozzle is included as an alternative, creating bubbles and increasing the oxygen level of the returning water - in principle doing away with the need for an air pump. The venturi effect comes from accelerating the water flow as it returns to the tank, which draws in a stream of air from above the surface. The spray bar and the venturi aeration nozzle cannot be run together; use one or the other.

A replaceable filter sponge sits inside the unit, and suction caps are supplied for attaching the filter to the side of your tank.

Features

• Designed for submersible use only with adjustable spray bar to increase oxygen levels.
• Venturi aeration nozzle supplied to create bubbles, increase oxygen level of returning water. No air pump needed in principle.
• Venturi effect: As water is pumped back into the tank, it can also be aerated by a venturi pipe. This accelerates the water flow and draws in a stream of air from above the surface.
• You can only either use the spray bar or Venturi aeration nozzle not both together.
• Replaceable filter sponge included inside the unit and also complete with suctions caps for attaching to the side of your tank.
• Power consumption: 2w
• Max Output: 300L/h
• Height Max: 0.6m
• Dimensions: 36 x 44 x 115 mm
• Power Cable Length: 2m
• Voltage: 220-240v
• 12 Months warranty.